BattleMeshV3/NodeConfigScript/Zlan here.

* creates an alias for the wired interface and give it an ip-address (keep the ip 192.168.1.1 unchanged for we need the node to respond to it for NodeConfigScript to work)


set -a

HOSTNAME="@PARAM1@"
WIRED_IP="@PARAM2@"
WIRELESS_IP="@PARAM3@"
CHANNEL="@PARAM4@"
CELL="@PARAM5@"

# to reset a node to it's pristine state,uncomment:
#
#firstboot
#sync
#
# this only makes sense if you're using the squashfs 
# doesn't seem to work on fonera

# setting hostname 
#
sysctl -w kernel.hostname=$HOSTNAME
uci set system.@system[0].hostname=$HOSTNAME
uci commit

# configure wired network interface
#
uci set network.zlan=alias
uci set network.zlan.interface=lan
uci set network.zlan.proto=static
uci set network.zlan.ipaddr=$WIRED_IP
uci set network.zlan.netmask=255.255.255.0
uci set network.zlan.gateway=192.168.42.1
uci set network.zlan.dns=192.168.42.1
uci commit

# disabling services
/etc/init.d/dnsmasq stop
/etc/init.d/dnsmasq disable
/etc/init.d/firewall stop
/etc/init.d/firewall disable
/etc/init.d/httpd stop
/etc/init.d/httpd disable

reboot
exit

BattleMeshV3/NodeConfigScript/Zlan (last edited 2010-03-23 19:57:44 by ptr_here)