On Sunday afternoon, we finally managed to execute a number of test scenarios in the 10-nodes setup.
Nodes were places between a horse stable, along a street and the house hosting the WBMv3.3 event.
The following diagram illustrate the setup and the existing links:

{{{

    11............17............15
     |    ch01     |     ch01    |
 9---+             |             |
     |             |             |
    14............18............16..............10----notebook
          ch13           ch13    :     ch13      :
                                 :..............12
                                       ch13
 house           pole           car             horse stand

...  :  24BMit wireless link using ch01 or ch13
---  |  100MBit ethernet link

}}}



There was line of sight (LoS) between the locations:
{{{
* house - pole
* pole - car
* car - horse stand
}}}
Transmit power of all nodes was fixed to 5dBm

Data rate of all nodes was fixed to 24MBit

The following network ranges were used:
{{{
* 10.10.x00.Node/24   static link local
* 10.10.x01.Node/24   batman  (udp.port == 4305)
* 10.10.x02.Node/24   babelz  (udp.port == 8475)
* 10.10.x02.Node/24   olsr    (udp.port == 698)
* 10.10.x02.Node/24   bmx6    (udp.port == 6240)
}}}

where x could be:
{{{
* x=2 for primary IP assigned to lan interface of node
* x=1 for non-primary IP assigned to wireless interface of node
}}}

Node 9 was a notebook participating in the mesh via ethernet and running all 4 routing protocols.

Test scenarios were initiated from node 10.

From 10 we send simultaneous ping recored-route probes to 9 and 11 to observe the selected routes chosen by different protocols.

In parallel, we also downloaded data from node 9 to node 10 to saturate the links.


The test were executed by opening several ssh-shells into node 10 from the notebook.
Logfiles of the different shells can be downloaded here:

[[http://battlemesh.org/BattleMeshV3.3/HorseTests?action=AttachFile&do=get&target=shell-olsr.txt|shell-olsr.txt]]