Agenda

Time

Title

Abstract

Type

Speaker

Slides & Documentation

9:00 -

collaborative work between participants

-

-

-

-

19:00 - 20:00

inofficial welcome

-

social

-

-

20:00 - 21:00

WiBed, a testbed platform for WiFi experiments

Wibed is a platform for facilitating the quick and cost-efficient acquisition, deployment, and management of testbeds based on commodity IEEE802.11 routers and enabling experimentation with wireless technology including the modification of low-level system components such as physical and link layer mechanisms, and network and transport layer protocols. WiBed was used, with partial (:-P) success in WBMv7 as the experiment firmware.

talk

Mano

Time

Title

Abstract

Type

Speaker

Slides & Documentation

9:00 -

collaborative work between participants

-

-

-

-

14:00 - 15:00

babel does not care

Babel is a robust routing protocol that just doesn't care. While initially designed to be reasonably robust and efficient on both wireless mesh networks and classical wired networks, over the years Babel has been extended with delay-based routing for overlay networks, with radio-interference aware routing, and even with source-specific routing. Whatever you throw at it, Babel doesn't care, it just keeps pushing packets in the right direction.
The talk will be elementary, and require little networking background.

talk

Juliusz

15:00 - 16:00

collaborative work between participants

-

-

-

-

16:00 - 17:00

lunch

-

social

-

-

17:00 - 18:00

GNUnet in community mesh networks

While originally meant to be used a framework for anonymous file-sharing, GNUnet has a lot to offer for wireless community networks as well: a truly distributed solution for name resolution, VPN tunnels and NAT traversal, to name just a few low-hangig fruits

talk

dango

slides

18:00 - 19:00

mesh in TV-whitespace

Presenting the TV-Whitespace experiment of Freifunk. The development of the equipment we use. Properties of the frequency band and ideas about the future use of the UHF.

talk

elektra

19:00 - 20:00

KORUZA- wireless optical system (beta presentation)

talk

Musti

Time

Title

Abstract

Type

Speaker

Slides & Documentation

9:00 -

collaborative work between participants

-

-

-

-

13:00 - 14:00

source specific routing in babel

multihoming is a difficult problem, and, unsurprisingly enough, there are many techniques for multihoming, none of which are applicable in all cases. The mesh networking community has standardised on using tunnels for multihoming (as with the "smart gateway" OLSR plugin). The home networking community has chosen a different solution, called "source-specific routing.".
The first complete implementation of source-specific routing was done by Matthieu Boutier and Juliusz Chroboczek, and was implemented within the Babel routing protocol. In this talk, I will explain what are the difficulties with multihoming, explain how source-specific routing solves many of those difficulties, and give an outline of Babel's support for source-specific routing.
References: http://arxiv.org/pdf/1403.0445

talk

Matthieu Boutier

14:00 - 15:00

peer to peer IPv6 networking in cjdns

Cjdns builds end-to-end encrypted, peer-to-peer IPv6 networks with useful properties -- the biggest so far being Hyperboria. We'll give a brief introduction to cjdns, its goals, and design decisions. We'll also show a few interesting use cases, and what the Hyperboria community is up to.
https://hyperboria.net
https://docs.meshwith.me/Whitepaper.html

talk

ansuz & Lars

15:00 - 16:00

redistributing the web with IPFS

IPFS is a global, versioned, peer-to-peer filesystem. It combines good ideas from Git, BitTorrent, Kademlia, SFS, and the Web. It is like a single BitTorrent swarm, exchanging Git objects. IPFS provides an interface as simple as the HTTP web, but with permanence built in. I'll give a brief introduction to IPFS, then show its potential use in mesh networks, for example as a distributed content cache.
https://github.com/ipfs/ipfs

talk

juan

16:00 - 17:00

lunch

-

social

-

-

17:30

organized transport to city center

-

social

-

-

18:00

Tour of Tkalka and KreatorLab

Find out more about

social

-

-

20:00 - 24:00

Party at GT22

Tour of the GT22, bar with beer and entertainment by Dj Splinta 639 and Vj Sajko

social

-

-

Time

Title

Abstract

Type

Speaker

Slides & Documentation

9:00 -

collaborative work between participants

-

-

-

-

14:00 - 14:30

Cake

Comprehensive Queue Management Made Easy - fq_codel is now widely deployed, and after gaining much experience with it, it had a few problems. Cake leverages the algorithms developed in fq_codel, is faster, uses less memory, and has fewer hash collisions. Work on cake is feeding back into the make-wifi-fast effort, also.

talk

Jonathan

-

14:30 - 15:00

Addressing Insecurity in internet of thing devices - a 5 year plan?

talk

dave / jim

15:00 - 16:00

openWRT vs. FCC - forced firmware lockdown?

The new FCC rules are in effect in the United States from June 2nd 2015 [1] for WiFi devices such as Access Points. They require to have the firmware locked down so End-Users can't operate with non-compliant parameters (channels/frequencies, transmit power, DFS, ...). In response, WiFi access point vendors start to lock down firmwares to prevent custom firmwares (such as OpenWRT) to be installed, using code signing, etc. Since the same type of devices are often sold world wide, this change does not only affect routers in the US, but also Europe, and this will also effect wireless communities.
We would like to discuss:
* What are your experiences with recently certified WiFi Hardware
* How can we still keep OpenWRT on these devices
* What can we suggest to Hardware vendors so that they keep their firmware open for community projects while still compliant with the FCC?
[1] https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?id=39498&switch=P

discussion

Simon Wunderlich

16:00 - 17:30

lunch

-

social

-

-

17:30 - 18:00

Preliminary Experiments with MultiPath TCP VPNs

Multipath TCP "aims at allowing a Transmission Control Protocol (TCP) connection to use multiple paths to maximize resource usage and increase redundancy" [source: wikipedia]. This talk reports some preliminary experiences about using VPNs on top of Multipath TCP.

talk

clauz

18:00 - 19:00

nmap security scanner

Presenting Nmap and how it can be used to investigate the security of our mesh networks, starting from basic usage, continuing explaining how to extend NSE (Nmap Scripting Engine) and finally giving an overview of the work I have done on Nmap during GSoC 2015 as student.

talk

g10h4ck

19:00 - 20:00

LigoWave

Talk about LigoDLB devices

talk

Ligowave

Time

Title

Abstract

Type

Speaker

Slides & Documentation

9:00 -

collaborative work between participants

-

-

-

-

14:00 - 15:00

project idea of „echt dezentrales Netz“ (EDN)

https://wiki.c3d2.de/Echt_Dezentrales_Netz/en

talk

demos

15:00 - 15:20

NetJSON

NetJSON is a data interchange format based on JavaScript Object Notation (JSON) designed to describe the basic building blocks of layer2 and layer3 networking. It defines several types of JSON objects and the manner in which they are combined to represent a network: configuration of devices, monitoring data, network topology and routing information. In this talk I'll introduce the basic concepts, motivations and goals. There will be some time left for questions and discussion.

talk and discussion

Nemesis

15:20 - 16:00

How different nodeDB projects can start joining forces on specific modules/packages

A few years ago we had a discussion about joining forces on a Common NodeDB project which didn't go well. After years of development we still don't have what we all hoped for, mainly because our efforts are disconnected and incostant. How we can remediate? NetJSON could be a step in the right direction, but I also want to talk about the work we have been doing in Nodeshot to extract key features in separate python packages and which benefits this has brought to us.

talk

Nemesis

16:00 - 17:00

lunch

-

social

-

-

17:00 - 17:45

Crust - reliable p2p network connections in Rust

Crust, a library built by MaidSafe, ensures reliable connections to any p2p network including the SAFE Network. In this presentation, MaidSafe founder David Irvine will present the functions of the library and design considerations for mesh network integration.
URL: https://github.com/maidsafe/crust

talk

david + paige

18:00 - 19:00

nodewatcher 3.0 release

nodewatcher, version 3.0, will hopefully be released during this talk. Nodewatcher is an open source network planning, deployment, monitoring and maintenance platform with emphasis on community. Version 3.0 is a complete rewrite bringing modularity and extensibility.

talk

Mitar, Kostko

19:00 - 20:00

battlemesh community meeting

The good and bad things this year. Searching a place for next year

discussion

-

Time

Title

Abstract

Type

Speaker

Slides & Documentation

9:00 -

collaborative work between participants

-

-

-

-

14:00 - 15:00

i18n for the Freifunk API

The Freifunk API is a collection of tools to get information from communities. The API files are hosted by the community itself. Let us show you our latest features and let's evolve an international version of it.

workshop

andi + monic

15:00 - 16:00

make wifi fast

This will go into all the techniques we think can go into wifi to make it feel faster under more circumstances, that I have described in various talks, in more depth than ever before, and talk about how to get them tested and deployed.

talk

dave

16:00 - 17:00

presenting the battle results

what are the test results?

talk

-

afternoon

BBQ & beer

-

social

-

-

Time

Title

Abstract

Type

Speaker

Slides & Documentation